Amps for Guitars and Basses

Articles de cette rubrique

• 

  Amps for Guitars and Basses : Marshall DSL40CR

  

  Marshall DSL40CR, All Tube Combo Amp for Electric Guitar, Reissue series - authentic DSL sound, Power : 40W, 2 footswitchable channels with classic gain and ultra gain, Assembly : 12" Celestion V Type loudspeaker, Preamp tubes : 4 x ECC83, Power tubes : 2 x EL34, Independent volume and gain controls for both channels, Clean and Crunch Modes in the Classic Gain Channel, Lead 1 and Lead 2 modes in the Ultra Gain channel, Classic sound control with bass, middle and treble, Presence control, Tone-shift circuit, Variable resonance control, Pentode- / triode switch, Digital reverb independent for...

   
• 

  Amps for Guitars and Basses : Roland Cube Street EX

  

  Roland Cube Street EX, Battery Powered Guitar Combo, 4 Channels, Power : switchable 50/25/10 Watt, Equipped with : 2x 8" speakers and 2x 2" tweeter, Stereo operation, 2 XLR combo jacks, Integrated effects : Chorus, Delay and adjustable Reverb, 3-Band EQ, Amp modelling (COSM), I-CUBE LINK capable, Stereo Line-In, AUX in, Shot over CUBE JAM app (available as a free download), Power supply via supplied PSU (PSB-12U) or 8 AA batteries (up to 20 hours run time in ECO mode), Switchable stereo link to link 2 Cube Street EX together, 2 Mono line outputs, Headphone output, 2 Foot switches for effect...

   
• 

  Amps for Guitars and Basses : Evh 5150 Iconic 60W 2X12 Combo IVY

  

  Evh 5150 Iconic 60W 2X12 Combo IVY, Tube Combo for Electric Guitar, 2 Channels, Power : 60 Watt, Speaker configuration : 2x 12"" EVH Celestion Custom, Preamp tubes : 2x ECC83, Power amp tubes : 2x 6L6, Channel 1 : Gain control with overdrive switch, Channel 2 : Gain control with burn switch and noise gate, Controls for Low, Mid, High, Boost, Reverb, Resonance and Presence for channel 1 + 2, 2 Separate volume controls for channel 1 + 2, Effects : Reverb, Total impedance : 4, 8 or 16 ohms, Effect loop send / return : 6.3 mm jack, Instrument input : 6.3 mm jack, Pre out : 6.3 mm jack, Footswitch...

   
• 

  Amps for Guitars and Basses : AER Alpha Akustikverstärker schwarz

  

  AER Alpha Black, Single Channel Compact Acoustic Amplifier, Power : 40 Watt, 2 Separately adjustable inputs : 1x Jack and 1x XLR/jack combo, Phantom power, 3-Band tone control, Colour Switch, Digital Hall, Outputs : Tuner, Line, Headphones, DI, Parallel effects loop, Weight : 6.5 kg, Dimensions : 265 x 260 x 235 mm, Carry bag included

   
• 

  Amps for Guitars and Basses : Markbass Little AG 1000

  

  Markbass Little AG 1000, Bass amplifier, Power : 1000 watts into 4 ohms, 600 watts into 8 ohms, Controls for gain, limiter, bass, mid 100Hz & 500 Hz), treble (1.4kHz & 6 kHz), master volume and line out, Switch : Mute, Pre/Post, Ground Lift, Input : 6.3 mm jack, Speaker output : Speakertwist and 6.3 mm jack, Effect send and return : 6.3 mm jack, Line output : XLR balanced, Tuner output : 6.3 mm jack, Footswitch connection (EQ On/Off) : 6.3 mm jack, Very light and compact design, Dimensions (W x H x D) : Approx. 27.6 x 8.3 x 25 cm

   
• 

  Amps for Guitars and Basses : Glockenklang Blue Bird

  

  Glockenklang Blue Bird, Amplifier Head for Electric Bass, Power : 900 W into 4 ohms, 450 W into 8 ohms, 600 W into 4 ohms or 300 W into 8 ohms - switchable on the rear panel, Class A input stage, Switchable tone control : 5-fold EQ with separate mid EQ, Switchable drive section, Drive and level control, Switchable voice filter, LED peak display, Separate inputs A/B Box with separate adjustment control for input B, Effect Return can also be used as MP3 and additional mixing input, Effect Return +-5 dB adjustable, Switchable balanced DI output, Tuner output, Headphone output, Input A for basses...

   
• 

  Amps for Guitars and Basses : Markbass Little Mark IV

  

  Markbass Little Mark IV, Amp Head for Electric Bass, 1 Channel, Power : 500 Watt RMS @ 4 Ohm, 300 Watt RMS @ 8 Ohm, Frequency response : 45 - 20000 Hz, Controls : Gain, Low, Mid Low, Mid High, High, Old School, Line Out, Master, 3-Way switch : Flat / Scooped-mid / FSW, Input : 6.3 mm jack, Footswitch connection : 6.3 mm jack, Balanced line output : XLR, Effect return & send : 2x 6.3 mm jack, Tuner output : 6.3 mm jack, Weight : approx. 2.8 kg, Dimensions (W x H x D) : approx. 27.6 x 8.3 x 25.5 cm

   
• 

  Amps for Guitars and Basses : Kemper Profiler Stage

  

  Kemper Profiler Stage, Kemper Profiler Stage@+The Kemper profiling technique allows the creation of a very precise sonic image (profile) of an existing amplifier configuration (including cabinet and microphone pickup). Thanks to the many internal processing options such as various ground effect emulations (up to 4 at a time), master effects, equaliser, gain, amp definition, power sagging etc., the sound created can then be processed far beyond the possibilities of the original amplifier. However, the Kemper Profiling Amplifier is also already delivered with a large number of outstanding...

   
• 

  Amps for Guitars and Basses : Markbass MB58R Mini CMD 121 Pure Combo

  

  Markbass MB58R Mini CMD 121 Pure Combo, Transistor Combo For Electric Basses, 1 Channel, Output power : 500 W @ 4 Ohm, 300 W @ 8 Ohm, Drivers : 1x12"" neodymium speaker, Tweeter : Hi-Fi, Speaker power handling : 400 W, Speaker impedance : 8 Ohm, Frequency range : 45- 20.000 Hz, Maximum level : 99 dB, BI- Band Limiter, Controls : Gain, line out, low, mid-low, mid-high, high, old school, master volume, Switches : Pre/ Post EQ for line out, ground lift, mute switch, 3-way switch for Flat/Scooped Mid/FSW, Scooped Mid LED, Input : 6.3 mm jack, Return Effects connector, Send Effects connector, Line output :...

   
• 

  Amps for Guitars and Basses : Fender Tone Master Deluxe Reverb

  

  Fender Tone Master Deluxe Reverb, Digital Combo Amplifier for Electric Guitar, 2 Channels : Normal and vibrato, Power : 100 W (simulates 22 W tube power), Equipped with : 1x 12"" Jensen N-12K neodymium speaker, Control for channel 1 (normal) : Volume, Treble, Bass, Control for channel 2 (vibrato) : Volume, Treble, Bass, Reverb, Speed, Intensity, 1 Output selector switch for full power and 5 damping settings, Impulse response, XLR line output with speaker simulation, Mute switch, USB connection for firmware upgrades, Weight : 11.3 kg, Includes 2-way footswitch and black protective cover

   

0 | ... | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150