Amps for Guitars and Basses

Articles de cette rubrique

• 

  Amps for Guitars and Basses : Markbass Mini CMD 121P V

  

  Markbass Mini CMD 121P V, Transistor Combo Amplifier for Electric Bass, Speaker configuration : 1 x 12" Markbass Neodymium Custom and 1 x piezo tweeter , Channels : 1, Power : 500 W (RMS) @ 4 ohms / 300 W (RMS) @ 8 ohm, Frequency range : 45 - 20,000 Hz, Controls : Gain, Low, Mid Low, Mid High, High, Old School, Line Out, Master, 3-Way switch for Flat / Scooped-Mid / FSW , Mute and ground switch, Input : 6.3 mm jack, Footswitch : 6.3 mm jack, Balanced line output : XLR, Effects send and return : 2x 6.3 mm jack, Tuner out : 6.3 mm jack, Bass reflex port at the rear , Very light and compact design ,...

   
• 

  Amps for Guitars and Basses : Kemper Profiling Amplifier PowerRack

  

  Kemper Profiling Amplifier PowerRack, Amplifier 19" VersionSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer’s sound specifications ? Prior to the release of the Kemper Profiling Amp, there were not many alternatives : either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as...

   
• 

  Amps for Guitars and Basses : Kemper Profiling Amplifier Rack schwarz

  

  Kemper Profiling Amplifier Rack BK, 19" Guitar Preamp@+Since the advent of modelling technology in the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer’s sound specifications ? Prior to the release of the Kemper Profiling Amp, there were not many alternatives : either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modelled sounds of the modelling amp as far as possible...

   
• 

  Amps for Guitars and Basses : Marshall Origin 50C Combo

  

  Marshall Origin 50C Combo, Tube combo amp for E-Guitar, Gain Boost function, Two voicings (Normal, High Treble), which can be mixed steplessly via the Tilt control, Switchable power reduction for a full sound in any environment, 1 Channel, Power : 50 watts, Pre-amp tubes : 3x ECC83 (12AX7), Power tubes : 2x EL34, Equipped with : 1x 12" Celestion G12N-60 Midnight speaker, Controls : Gain - Tilt - Bass - Middle - Treble - Master - Presence, Switches : Power On / Off - Output Low/Mid/ High - Gain Boost (Pull Volume), Series effects loop, Connectors : Input (6.3 mm Jack) - DI Out (6.3 mm Jack) - FX...

   
• 

  Amps for Guitars and Basses : Blackstar ID:Core 20 V4

  

  Blackstar ID:Core 20 V4, Combo Amplifier for Electric Guitar, Power : 20 watts (2x 10 watts stereo), Equipped with : 2 x 5" speaker, Controls : Voice, Gain, Volume, ISF, Effects Type, Effects Level, Voices : Clean warm, clean bright, crunch, super crunch, OD1, OD2, Switches : Modulation, Delay, Reverb, Manual, Tap, USB C, Cab Rig / Phones, Line In / Streaming, 12 Vintage effects, Free software, Power reduction down to 1 watt, Dimensions : 375 x 292 x 185 mm, Weight : 5.2 kg, Finish : Black

   
• 

  Amps for Guitars and Basses : Mooer Hornet Black 30W Modeling Amp

  

  Mooer Hornet Black 30W Modeling Amp, Modeling Guitar Combo, Power : 30 Watt RMS, Speaker configuration : 1x Custom 8" (8 Ohm), 9 High-quality digital replicas of the popular amplifiers for electric guitars, 3 Selectable modulation effects : Chorus, phaser and vibrato, 3 Selectable delay types : Analogue, tape echo and digital, 3 Selectable reverb types : Room, hall and church, 2 Operating modes : Live / Preset, Independent tap tempo input for modulation effects and delay, Built-in tuner, 9 User presets, Wireless Bluetooth connection and AUX input for media payback, Controls for : Gain, treble,...

   
• 

  Amps for Guitars and Basses : HoTone Pulze Eclipse

  

  HoTone Pulze Eclipse, Modelling Combo for Electric Guitar, Modern Bluetooth digital modelling amplifier with minimalist design, Specially designed ABS housing ensures stereo width and a true-to-the-original sound, Advanced CDCM HD & F.I.R.E. modelling system ensures first-class tonal expressiveness and a realistic playing experience, Intuitive operation via 4" 800x480 touchscreen or Bluetooth (app), Supports wireless control via Bluetooth MIDI, 46 Amp models, 48 cabinets, legendary effect pedals, Up to 7 simultaneous effect modules with editable sequence, Up to 200 presets can be saved,...

   
• 

  Amps for Guitars and Basses : Darkglass Alpha·Omega 900 Bass Head

  

  Darkglass Alpha·Omega 900 Bass Head, Transistor Amp Head for Electric Bass, 1 Channel, Power : 900 Watt, Dual-drive engine with mod control for infinitely adjustable (no fixed increments or steps) combination of alpha and omega drive circuits, Latency-compensated post DI with digital speaker simulation, Headphone output with speaker simulation, Three impulse response slots selectable via cab select switch, Adjustable VCA compression at studio quality, Controls : Comp, drive, level, mod, blend, gain, master, headphone volume, Switch : Input passive/active, distortion, bite, growl, mute,...

   
• 

  Amps for Guitars and Basses : Darkglass Microtubes 900v2 Bass Head

  

  Darkglass Microtubes 900v2 Bass Head, Transistor Amplifier Head for Electric Bass, 1 Channel, Power : 900W, Analogue preamplifier with switchable vintage microtubes and microtube B3K drive circuits, Latency compensated post DI with digital speaker simulation, Headphone output with speaker simulation, Three impulse response slots, selectable via Cab select switch, Adjustable VCA compression in studio quality, Controls : Comp, Drive, Level, Tone, Blend, Gain, Master, 6-Band EQ, Headphone Volume, Switch : Input Passive/Active, Microtubes, VMT/B3K Drive Circuit, Mute, Impedance 4/2 Os, Gnd. >...

   
• 

  Amps for Guitars and Basses : tc electronic BQ500 Bass Head

  

  TC Electronic BQ500 Bass Head, Transistor Amplifier Head for Electric Bass, Compact and lightweight amp head with Mosfet preamp and thrust compressor, 1 Channel, Power rating : 500 W, Controls : Gain, Thrust Compressor, Bass, Lo-Mid, Hi-Mid, Treble, Master, Switch : Passive/Active, Compressor On/Off, DI Pre/Post Eq, Dimensions (W x D x H) : 255 x 233 x 69 mm, Weight : 2.3 kg@+*Connections :*@+@+, Input : 6.3 mm jack, DI Output : XLR, AUX input In : 3.5 mm stereo jack, Headphones : 3.5 mm stereo jack

   

0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | ... | 150